Filter
Top Products
132
Operational settings
Operation beep
DVD-RAM
DVD-RW
DVD-VIDEO
VCD CD
DVD-R
Turn on or off a confirmation beeper announcing when a
command is received.
Off:
Turns off the beep sound.
On:
Turns on the beep sound.
Note
• You cannot turn off beeps for alerts irrespective of this
setting.
Recording complete beep
DVD-RAM
DVD-RW
DVD-R
This is used to set whether or not a buzzer sounds when
dubbing and so forth is finished.
Off:
Buzzer does not sound.
On:
Buzzer sounds.
Note
• You cannot turn off beeps for alerts irrespective of this
setting.
IR Code
Switches the codes to operate the recorder. If you use
the second and third TOSHIBA DVD video recorders, set
the different remote codes for each recorder to avoid
confusion in the response of the recorders.
For details about this setting, refer to “Operating the
second and third TOSHIBA DVD video recorders with the
remote control of this recorder” (
page 48,
“INSTALLATION GUIDE”).
DR 1 : DR 2 : DR 3
Instant skip interval
DVD-RAM
DVD-RW
DVD-VIDEO
VCD CD
DVD-R
Sets how much time is skipped when the INSTANT SKIP
button is pressed.
5 sec. : 10 sec. : 30 sec. : 5 min.
Instant replay interval
DVD-RAM
DVD-RW
DVD-VIDEO
VCD CD
DVD-R
Sets how far back is replayed when the INSTANT
REPLAY button is pressed.
5 sec. : 10 sec. : 30 sec. : 5 min.
Title thumbnail point
DVD-RAM
DVD-RW
DVD-R
For recorded titles, sets how far a scene from the start is
set as the title thumbnail.
0 sec. : 3 sec. : 10 sec. : 35 sec. : 1 min. : 5 min.
Note
• Thumbnails can also be changed to other scenes.
See page 99.
Title playback
DVD-RAM
Sets the resume play per title.
Title resume:
Remembers the point where you stop playback.
Allows you to resume the playback from that point.
Serial playback:
You can play back titles (Original, Playlist) stored in
the DVD-RAM continuously.
Because there is no division between titles, the
recorder remembers only the last point where you
stopped playback.
Still group interval
DVD-RAM
Sets an interval for display of still pictures (in seconds)
when playing back a collection of still images.
1 sec. : 2 sec. : 3 sec. : 5 sec. : 10 sec. : Default
Priority contents
To select the playback priority between JPEG (picture)
files and MP3/WMA (audio) files.
Photo: JPEG files take priority over MP3/WMA files.
Audio: MP3/WMA files take priority over JPEG files.
Note
• If this selection does not correspond to disc contents, the
recorder will take a longer time to start playback of the
disc.
Customizing the function settings (Continued)
Function Setup