54
Playing recorded contents (CONTENT MENU) (Continued)
Playback
To stop playback
Press STOP.
To pause playback (still playback)
Press PAUSE.
To resume normal playback, press the PLAY button or
the PAUSE button.
Note
• Sound is muted during still mode.
Resuming playback from the location last
stopped (Title resume)
DVD-RAM
The recorder memorizes the location you last stopped
playback to resume there.
To use this function, set “Title playback” (
page 132)
to “Title resume.” The recorder will memorize the
location you last stopped at in each title, so you can
resume playback there. For example, if there are 6
titles, you can start each of them as if you had stored
6 video tapes in the recorder.
• To return to the beginning of the title
During playback, press the QUICK MENU button,
then press the
/ buttons to select “Restart title,”
then press the ENTER button.
• To play another title
Press the CONTENT MENU button to display
“CONTENT MENU Title List,” then select a title.
You can make the recorder memorize only the very
last point, regardless of the number of titles. Set “Title
playback” (
page 132) to “Serial playback.”
• To return to the beginning of the title
Press the SKIP (
) button repeatedly until the
beginning of the title appears.
• To play the other title
Press the SKIP (
/ ) button repeatedly.
PAUSE
Notes
• Depending on the status or the contents, playback may not
start from the location last stopped, but instead another
location. For example, from the beginning of the disc or
title.
• Depending on the disc, there may be a slight difference
between the location the recorder memorized and the
actual location where playback starts.
• This function is not available on DVD-R/RW discs.
• The resuming function will not work if the write-protect tab
is set to “PROTECT” ( page 8).
Playing the digest (Skip Search)
DVD-RAM
This feature repeats playback of about 5 seconds and
skip of 1 minute from the beginning to the end of a
recorded title, so that you can view the digest of it.
1) Perform steps 1 and 2 on
page 53, and
select a title that you want to view the digest.
2) Press QUICK MENU.
The Quick Menu is displayed.
3) Press
/ to select “Special playback mode”,
then press ENTER.
4) Press
/ to select “Skip search”, then press
ENTER.
The Skip Search starts.
Notes
• This feature can be used only one title (original) recorded
on a DVD-RAM disc.
• While using this feature, you cannot use speed-related
functions such as fast forward or fast reverse.
• If you press the ENTER button while using this feature, the
normal playback starts.
• To cancel this feature, press the STOP button twice.
STOP