Filter
Top Products
32
Recording a TV program
To record a TV program currently being broadcast, follow the procedures of this chapter.
Recording
DVD-RAM
DVD-RW
DVD-R
TIMESLIP
EASY
NAVI
INSTANT SKIPINSTANT REPLAY
PLAYSTOPPAUSE
REC
LIBRARY
REC MENU EDIT MENU
CONTENT MENU
ANGLE
OPEN/CLOSE
SUBTITLE
AUDIO
CHANNEL
QUICK MENU
TOP MENU
MENU
RETURN
DVD
F
R
A
M
E
/
A
D
J
U
S
T
P
I
C
T
U
R
E
S
E
A
R
C
H
S
K
I
P
S
L
O
W
ENTER
TV/VIDEO CHANNEL
VOLUME
REMAIN
DIMMER
FL SELECT
ZOOM P in P
TIME BAR CHP DIVIDE
DISPLAY
INPUT SELECT
PROGRESSIVE
TV
1
Press INPUT SELECT repeatedly to select a
recording source.
Each time you press the button, the indicator alternates.
Ch-: To record a TV program or cable program with
recorder tuner.
L-1: To record a source connected to the INPUT1
jacks on the rear panel (
page 36).
L-2: To record a source connected to the INPUT2
jacks on the front panel (
page 36).
L-3: To record a source connected to the INPUT3
jacks on the rear panel (
page 36).
To record a program from a connected set top box, set
the channel to “Ch-3”, “Ch-4”, “L-1” or “L-3” according to
the connection (the same as
page 40 on
“INSTALLATION GUIDE”).
If the connection of the supplied IR control cable and
the necessary settings are all done, you can select
channels of the connected set top box with the
recorder’s remote control.
If not, select the proper channel on the set top box to
receive the desired program.
Preparation
• Load a DVD-RAM/R/RW disc into the recorder.
- Load a disc which has sufficient space available to record the program.
- Make sure the loaded disc is not write-protected.
• If you record on a DVD-R or a DVD-RW disc, set “DVD compatible mode” (
page 134) to “Main” or “SAP.” In DVD-
R/RW recording, “Off” setting is regarded as “Main.”
• If you record on a DVD-R or DVD-RW disc, set “Aspect ratio(Video mode)” (
page 134) according to recording
sources.
INPUT SELECT