Filter
Top Products
English - 27
System Setup
26 - English
System Setup
No Disc
Auto Clock Set
Clock Data CH : Automatic
Time Zone : Automatic
Daylight Saving : Automatic
Automatic
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
No Disc
Auto Clock Set
Clock Data CH : Automatic
Time Zone : Automatic
Daylight Saving : Automatic
Automatic
Yes
No
Time ZONE
Select the time zone of your area using the ➐❷☎but-
tons then press the
❿☎or ENTER button. Select
Automatic to set the time zone automatically.
Daylight Saving
Select the On, Off or Auto using the ➐❷☎buttons then
press the
❿☎or the ENTER button.
Select Automatic to set the daylight saving automatically.
If your clock is set to the wrong time zone or day-
light saving, you can adjust these settings without
turning off the Auto Clock Set function.
Manual Clock Set
If Auto Setup fails to set the DVD Recorder-VCR’s internal
clock by locating a local TV station, follow these steps to set
the date and time manually.
NOTE: For accurate Timer Recording, your DVD Recorder-
VCR's internal clock must be set correctly.
Open “MENU”
Press the MENU button while the DVD or VCR is
in Stop or Play mode.
1
Select “Setup”
Using the ➐❷ buttons, move the selection bar to
“Setup” then press ENTER to select.
2
Select “Clock Set”
Use the
➐❷
buttons to highlight “Clock Set”
then
press the ENTER button.
3
Select “Manual Clock Set”
Move the highlight to “Manual Clock Set”, then
press the ENTER button.
• The Clock Set will change as shown.
4
Note
Auto Clock Set
This menu is used to set the current time. You need to set
the time to use timer recording.
With the unit in Stop mode, press the MENU button.
1
Select Clock Set using the ➐❷☎buttons, then press
the
❿ or ENTER button.
3
Select Auto Clock Set using the ➐❷☎buttons, then
press the
❿ or ENTER button.
4
Select the sub menu (Clock Data CH, Time Zone or
Daylight Saving) using the
➐❷ buttons, then press
the
❿ or ENTER button.
5
No Disc Clock Set
Manual Clock Set
Auto Clock Set
No Disc
No Disc
No Disc
Auto Clock Set
Time Zone : Automatic
Daylight Saving : Automatic
Clock Data CH : Automatic
No Disc
Clock Data CH
Select channel :
Auto
Using the ➐❷☎buttons, move the selection bar to
“Setup” then press Enter to select.
2
Clock Data CH
Select a channel that carries a time signal using the
➐❷☎buttons then press the ❿☎or ENTER button.
Select Auto to set the channel automatically.
Note
You must have the antenna connected to set the
Auto Clock. See page Antenna Connections
The Clock will be automatically set when you turn
off the recorder.