Toshiba D-VR3SU DVD VCR Combo User Manual


 
System Setup
36 - English
System Setup
n
:
:
:
Select “Auto Repeat”
Move the selection bar to “ Auto Repeat”. It sets the
VCR to play a tape repeatedly [unless a tape control
is activated (Stop, Fast Forward or Rewind)].
7
Off
On
Video Input
If you watch video through Line 2, you can choose
Composite or Super(S)-video.
Open “MENU”
With the DVD Recorder-VCR in stop or play mode,
press the MENU button.
1
Select “Setup”
Using the ➐❷ buttons, move the selection bar to
“Setup” then press ENTER to select.
2
n
:
:
:
Select “Tape Length”
Press the RIGHT button to select the Tape Length.
This information is usually printed on the tape box.
The menu cycles through: T-120, T-160 or T-180.
Once the type of cassette is set, the VCR can display
the amount of time remaining on the tape when you
press the INFO. button.
5
n
:
:
:
Select “Auto Play”
Move the selection bar to “Auto Play,” then press
right button to select from the following options:
• On - The VCR will automatically begin playing a
video tape when it is inserted, as long as the
safety tab of the cassette has been removed.
• Off - Auto play is disabled.
6
T-120
T-160
T-180
Select “VCR”
Using the ➐❷ buttons, move the selection bar to
“VCR”, then press ENTER to select.
4
On
Off
VCR Setting
If you want your videotapes to play automatically when you
insert them, turn on Auto Play.
Open “MENU”
With the VCR in Stop or Play mode, press the
MENU button.
1
Select “System”
Use the ➐❷ buttons to highlight “System” then
press the ENTER button.
3
Only tapes that are missing the Record Safety Tab
will play automatically when inserted.
Note
DVD-VIDEO
Select “Setup”
Using the ➐❷ buttons, move the
selection bar to “Setup” then press ENTER to select.
2
English - 37
Select “Channel Set”
Using the ➐❷ buttons, move the selection bar to
“Channel Set”, then press ENTER to select.
3
Select “Guide Channel Setup”
Move the selection bar to “Guide Channel Setup”.
4
Select the guide channel you want
to set.
5
Change “TV Channel”
Using the ➐❷ buttons to select the TV channel
corresponding to the guide channel and press
ENTER.
* Repeat steps 5 and 6 as necessary.
6
Press the Return button to return to the previous
menu.
Press the MAIN MENU button to exit the MAIN
menu.
Note