Filter
Top Products
Playback
Playback
English - 5756 - English
Insert VHS Tape
Insert a standard VHS videotape into the VCR deck.
• When a videotape is inserted, power will turn on
automatically.
1
Adjust Tracking Manually
During playback, press the CH/TRK
/
buttons to remove white lines from the picture.
1
Play Tape
Press the
❿
II
(PLAY/PAUSE) button on the remote
control or on the front panel of the unit. The video-
tape will begin to play automatically if it is missing
the Record Safety Tab and Auto Play is turned on.
See pages 36~37.
2
Stop Playback
Press the
(STOP) button on the remote control or
on the front panel of the unit.
3
To play a standard VHS videotape, just insert it into the
VCR deck and press the PLAY button. You can turn on the
Auto Play to enable the VCR deck to play automatically
when you insert a videotape that is missing the Record
Safety Tab. See pages 36~37.
Playing the VCR
The Tracking adjustment removes almost the white lines
that sometimes appear during playback because of slight dif-
ferences in recording decks. The TRK button will automati-
cally align the recorded tracks with the playback heads to
solve this problem. You may also set tracking manually.
Tracking
Press the PIP button.
• The current disc is played back on the PIP screen
located at the bottom of the screen.
1
The PIP function allows you to view a sub screen together
with the main screen in DVD mode.
You can watch both DVD and TV together.
Using PIP
PIP does not work in VCR mode.
Note
Switching between the PIP and
main screens
Press the PIP button again.
• The main and PIP screen will be switched.
1
Deactivating PIP
Press the PIP button again.
• PIP will be deactivated.
1