Filter
Top Products
Acutime 2000 Synchronization Kit User Guide A-15
A Trimble Standard Interface Protocol
38 Load satellite system data 58
39 Satellite enable/disable and health heed/ignore 59 (Note 3)
3A Last raw measurement 5A
3B Satellite ephemeris status 5B
3C Tracking status 5C
3D Timing port configuration 3D
3F-11 Request EEPROM segment status 5F-11
7A Set/request NMEA interval and message mask 7B
BB Set receiver configuration BB
BC Set port configuration BC
8E-0B 8F-0B output configuration 8F-A5/8F-0B
8E-14 Set new datum 8F-14
8E-15 Current datum values 8F-15
8E-20 Last fix (fixed point) 8F-20
8E-26 Write receiver configuration EEPROM 8F-26
8E-41 Manufacturing parameters 8F-41
8E-42 Production parameters 8F-42
8E-45 Revert segments to default settings 8F-45
8E-4A Set/request PPS characteristics 8F-4A
8E-4B Survey limit 8F-4B
8E-4D Packet Output Mask 8F-4D
8E-4E Set PPS output option 8F-4E
8E-4F Set PPS Width (Acutime 2000 only) 8F-4F
8E-A5 Set or request packet broadcast mask 8F-A5
8E-A6 Issue self-survey command 8F-A6
8E-AB Set/request primary timing packet 8F-AB
8E-AC Set/request supplemental timing packet 8F-AC
8E-AD 8F-AD output configuration 8F-A5/8F-AD
Note 1: Output is determined by packet 35 settings. See Table to determine which messages
are output at power-up.
Table A-14 Command Packets Sent to the Receiver (Continued)
Input Packet Description Output ID