Filter
Top Products
A-98 Acutime 2000 Synchronization Kit User Guide
Trimble Standard Interface Protocol
A
0x8E-A6
Command Packet 8E-A6
Issue Self-Survey Command
This command packet starts a self-survey. The ACE UTC GPS
responds with report packet 8F-A6. This command has no effect
when survey is disabled.
0x8E-A9
Command Packet 8E-A9
Set Self-Survey Parameters
Use command packet 8E-A9 to set the self-survey parameters or to
request the current settings. The ACE UTC GPS replies with response
packet 8F-A9.
Data Fields:
Self-Survey Enable
: Use this field to enabled or disabled the self-
survey mechanism.
0: Disable the self-survey mechanism
1: Enable the self-survey mechanism
Position Save Flag
: Use this field to tell the self-survey mechanism to
automatically save (or to not save) the self-surveyed position at the
end of the self-survey procedure.
0: Do not automatically save the surveyed position when the
self-survey is complete
Table A-81 Command Packet 8E-A6
Byte Item Type Value Meaning
0 Subcode BYTE 0xA6
1 Self-survey
command
BYTE 0 Restart self-survey