Filter
Top Products
A-90 Acutime 2000 Synchronization Kit User Guide
Trimble Standard Interface Protocol
A
0x8E-42
Command Packet 8E-42
Production Parameters
This packet is used to request the production parameters stored in
nonvolatile memory. This packet contains only a single byte, the
subpacket ID. The receiver returns packet 8F-42.
0x8E-45
Command Packet 8E-45
Revert Segments to Default Settings
This command packet reverts the parameters stored in a specific
EEPROM segment (or all segments) to their factory default settings
and reconfigures the ACE UTC GPS using those settings. The
receiver returns packet 8F-45.
Table A-74 Command Packet 0x8E-45
Byte Item Type Value Segment Description
0 Subcode BYTE 0x45
1Segment
number
BYTE 2
3
4
5
6
7
8
11
0xFD
0xFF
Receiver configuration
Packet I/O control
Serial port configuration
Timing output configuration
Accurate position
Self-survey configuration
NMEA configuration
UTC information
Segments 2 through 8
All segments