Filter
Top Products
A-94 Acutime 2000 Synchronization Kit User Guide
Trimble Standard Interface Protocol
A
Note 1: A 1 in the bit mask turns on the associated packets and a 0 turns off the output of the
associated packets.
0x8E-4E
Command Packet 8E-4E
Set PPS Output Option
This command packet sets the PPS driver switch to one of the values
listed in Table A-78. The receiver returns packet 8F-4E. The current
driver switch value can be requested by sending this packet with no
data bytes except the subcode byte.
Driver switch values 3 and 4 only make sense in Overdetermined
Timing mode. In any position fix mode the effective choices are
10 1 0 Reserved
11
(Note 1)
6D, 46, 4B, 82 1 0 Constellation
Change,
New Fix
New satellite
selection
12 1 0 Reserved
13-29 1 0 Reserved
30 42, 43, 4A, 54,
56, 83, 84,
8F-20,
10New Fix
Update
Kinetic and
Timing
information.
Output must be
enabled using
I/O options.
31 5A 1 0 New Fix Raw
Measurement
Data
Output must be
enabled using
I/O options.
Table A-77 Command Packet 8E-4D - Packets Affected By Bits
Bit # Output
Packets
Default
A2K
Default
ACE
UTC
When
Output
Meaning