Filter
Top Products
MCX-2000 Owner’s Manual
36
n If you have more than 4 clients, copy the blank chart above and substitute the appropriate client numbers as needed.
Settings on the MCX-2000
1 Select Top Menu > Setup > Network > Advanced Settings.
2 From the above menu, select IP Address or Wireless LAN as needed, and set up the relevant parameters shown in the
screen.
n If you reconfigure your MusicCAST network because you have changed the target PC network configurations, you may want to clear existing
MCX-2000 network settings using the Network Settings Reset command from the above menu (page 100).
System Unique
Information
Server/Client ID
MCX-2000 Client
(1)
Client
(2)
Client
(3)
Client
(4)
SV-_ _ _ _ _ CL-_ _ _ _ _ CL-_ _ _ _ _ CL-_ _ _ _ _ CL-_ _ _ _ _
Network Settings
Setting Method
DHCP Server /
DHCP Client /
Manual
(Specify a valid IP
address below
with Manual.)
DHCP Client /
Manual
(Specify a valid IP
address below
with Manual.)
DHCP Client /
Manual
(Specify a valid IP
address below
with Manual.)
DHCP Client /
Manual
(Specify a valid IP
address below
with Manual.)
DHCP Client /
Manual
(Specify a valid IP
address below
with Manual.)
IP Address (when
DHCP is disabled) ... ... ... ... ...
Subnet Mask ... ... ... ... ...
Gateway Address ... ... ... ... ...
Primary DNS ... ————
Secondary DNS ... ————
NTP Server
(only when used)
(Server domain name
when DNS is specified;
Server IP address
when DNS is not
specified.)
————
...
————
Wireless LAN
ESS ID (up to 13
ASCII characters)
WEP Key (up to 13
ASCII characters)
Channel ————
Advanced Settings menu