Filter
Top Products
MCX-2000 Setup Guide
9
Remote Control Features and Operations
You can use the supplied remote control to peform most of the MCX-2000 operations (such as selecting a menu item or
determining a setting value). Prepare the remote control before operations.
Setting Batteries
Set batteries inside the remote control as shown below.
1 Remove the bottom cover of the remote control.
2 Set two AA batteries (supplied) in appropriate directions, according to the illustration in the compartment.
3 Slide the cover until it snaps into place.
n If the remote control doesn’t work well, the batteries may be weak. Replace them with twe new AA batteries. Always handle batteries
appropriately, according to the safety precautions at the beginning of this manual.
Powering Up
Turn on your TV and switch it to external input (connected to the MCX-2000 video output). When you turn on the MCX-
2000, your TV will show the initial “MusicCAST” splash screen, followed automatically by the Easy Setup screen.
n The MCX-2000 is designed to show the Easy Setup screen when you first turn on the unit (factory setting). If the Easy Setup screen doesn’t
appear, press the TOP MENU button on the remote control. When the Top Menu screen is shown on the TV, use the cursor controller (in the center
of the remote control) to move the highlighted selection down to Setup (the last item of Top Menu), and press the SELECT button. Then, from the
Setup menu screen, select Easy Setup. Scroll down in the display if it’s not visible.
1
2
3
TV
2 Change to external input
1 Turn ON
MCX-2000
AC plug and outlet for US model