Filter
Top Products
MCX-2000 Owner’s Manual
74
4 A list of songs will be shown in white (only when “Ready to
record” is shown). If you want, edit the album title and/or
artist name for the CD you’re going to create using the
following two commands from the Submenu.
Either command opens the character palette. So, you can
type necessary text characters using the palette, or using a
PS/2 keyboard connected to the MCX-2000 front panel
(page 75).
5 When you’re ready, start recording by selecting the
relevant command from the Submenu. The MCX-2000
writes the songs at 4x speed.
n Archived songs are analog recorded onto a CD-R/RW disc.
6 When the CD recording process is finished, the
MCX-2000 shows the following dialog box, asking what
you want to do next.
Open CD screen: Select this to finish the process, and
open the CD song list screen (page 52) to confirm a list of
songs on a music CD you’ve just created.
Create another CD-R/RW: Select this if you want to
make another CD. The MCX-2000 automatically opens the
tray and lets you repeat the above procedure from step 3.
Exit this screen: Select this to finish the process.
n If you cancel the process or exit the operation screen before
proceeding to step 5, you may see songs selected in the last session
the next time you open this screen. You can clear them by selecting
Clear content from the Submenu. You can easily replace songs by
selecting another playlist or album using the Select content command
from the Submenu (as in step 3 above).