Filter
Top Products
MCX-2000 Owner’s Manual
42
ESS ID
Specify the ESS ID for the wireless network created by the target MCX-2000. You can confirm the MCX-2000 ESS ID,
by selecting Top Menu > Setup > Network > Advanced Settings > Wireless LAN.
When you have finished, select and determine Save & Network Restart. When the “Please wait.” message is shown and
your setting is stored, you will go back to the Manual Setup menu. If you abort your change, select Cancel or push the
controller stick leftward.
n Wired-only clients (MCX-C15) don’t have this parameter.
WEP Key
Specify the WEP key for the wireless network created by the target MCX-2000. You can confirm the MCX-2000 WEP key,
by selecting Top Menu > Setup > Network > Advanced Settings > Wireless LAN. In addition, you can also view the WEP
key in hexadecimals (HEX) in the client display (just for confirmation).
When you have finished, select and determine Save & Network Restart. When the “Please wait.” message is shown and
your setting is stored, you will go back to the Manual Setup menu. If you abort your change, select Cancel or push the
controller stick leftward.
n Wired-only clients (MCX-C15) don’t have this parameter.