Getting Started
6-EN
Remote control sensor
About the Remote Control
Notes on Using the Remote
Controlmmmmmmmmmmm
Point the remote control transmitter at the
remote control sensor.
If connected to an IONBUS compatible head
unit, even if you point the remote control at the
remote control sensor on the head unit, the
operation is received the same way.
• Point the remote control at the remote sensor
within about 2 meters.
• It may not be possible to operate the remote
control unit if the remote control sensor is
exposed to direct sunlight.
• The remote control is a small, light weight
precision device. To avoid damage, short
battery life, operational errors and poor
button response, observe the following.
− Do not subject to shock.
− Do not put in a trouser pocket.
− Keep away from food, moisture and dirt.
− Do not place in direct sunlight.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY
FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be performed after
coming to a complete stop. Always stop the vehicle in a safe location before performing
these functions. Failure to do so may result in an accident.
Warning
Battery Replacement
Applicable battery: Use two “AAA” sized dry
batteries or equivalent.
1 Opening the battery cover.
Push on the cover and slide it as
indicated by the arrows then the
cover will be removed.
2 Replacing the battery.
Put the batteries in the case
observing the polarity, as illus-
trated.
3 Closing the cover.
Push the cover in the arrow
direction until a click is heard.