Filter
Top Products
Setup
44-EN
4 Press VISUAL EQ or OPEN/CLOSE / SETUP, and
select the preferred item setting.
When you press OPEN/CLOSE / SETUP, you move
to the next item, press VISUAL EQ to move to the
previous item.
5 Change the setting by pressing / TILT or / TILT.
6 To return to the GENERAL SETUP screen, press
/ TILT or / TILT after selecting RETURN.
To exit the setup, press and hold OPEN/CLOSE /
SETUP for at least 2 seconds.
To return to the
GENERAL SETUP
screen, select
RETURN.
To exit the setup:
Setting the AUX Mode
Setting item: AUX IN 1, 2, 3, SIG.
Setting content:
ON/OFF
ON: AUX source is displayed.
OFF: AUX source is not displayed.
Before perfoming each setting, please refer to “Setup menu chart” on
page 33 and “AUX IN/S-IN setup standard operation” on page 43.