Alpine TMI-M990 Universal Remote User Manual


 
55-EN
Parking Brake Lead Connection
If necessary, use a pinch connector to connect the foot brake lead, parking brake lead, etc.
12
Vehicle Cable
Stopper
Monitor Cable
Pinch Connector
Pliers
Foot Brake Lead / Parking Brake Lead Connection
Connection Diagram of SPST Switch (Sold Separately)
(If the ACC power supply is not available)
If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold
separately) and fuse (sold separately).
The diagram and the fuse amperage shown above are in the case when TMI-M990 is used
individually.
If the switched power (ignition) lead of the TMI-M990 is connected directly to the positive (+)
post of the vehicles battery, the TMI-M990 draws some current (several hundred milliamperes)
even when its switch is placed in the OFF position and the battery may be discharged.
FOOT BRAKE
PARKING BRAKE
(Yellow/Black)
TMI-M990
Monitor
Foot brake lamp
Foot brake switch
Foot brake lead
Parking brake lead Parking brake switch
Battery
Chassis
Parking brake lamp
Pinch
Connector
Pinch
Connector
(Yellow/Blue)
BATTERY
IGNITION
(Red)
(Yellow)
SPST SW (Optional)
FUSE (1A)
(Optional)
FUSE (7.5A)
(Optional)
TMI-M990
(Monitor)
Battery