Alpine TMI-M990 Universal Remote User Manual


 
5-EN
PRECAUTIONS
Product Cleaning
Use a soft dry cloth for periodic cleaning of
the product. For more severe stains, please
dampen the cloth with water only. Anything
else has the chance of dissolving the paint or
damaging the plastic.
Temperature
Be sure the temperature inside the vehicle is
between +45°C (+113°F) and 0°C (+32°F)
before turning your unit on.
Moisture Condensation
You may notice the disc playback sound
wavering due to condensation. If this
happens, remove the disc from the player and
wait about an hour for the moisture to
evaporate.
Maintenance
If you have problems, do not attempt to
repair the unit yourself. Return it to your
Alpine dealer or the nearest Alpine Service
Station for servicing.
Installation Location
Make sure the TMI-M990 will not be
installed in a location subjected to:
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
After turning the system off, a slight ghost
of the image will remain temporarily. This
is an effect peculiar to LCD technology
and is normal.
In cold temperature conditions, the screen
may lose contrast temporarily. After a
short warm-up period, it will return to
normal.
Remove the anti-theft cover when you drive.
This prevents the cover from falling off the
unit and interfering with the safe operation of
the vehicle.
Operation of some of the functions of this
unit is very complex. Because of this, it was
deemed necessary to place these functions
into a special screen. This will restrict
operation of these functions to times when
the vehicle is parked. This ensures the focus
of the driver's attention will be on the road
and not on the TMI-M990. This has been
done for the safety of the driver and
passengers.
The Setup operation cannot be performed if
the car is moving. The car must be parked
and the parking brake must be engaged for
the procedure described in the Owner's
Manual to be valid. The warning CAN'T
OPERATE WHILE DRIVING, will be
displayed if any attempts are made to
perform these operations while driving.
This operation is the same as when selecting
sources using the remote control. When the
car is parked, the selection is made as
described in the Owner's Manual.