Alpine TMI-M990 Universal Remote User Manual


 
Getting Started
8-EN
How to Read This Manual
This manual details how to operate the TMI-M990 and the supplied remote control RUE-4199.
Basic Operation
16
-
EN
Switching the Source
1
Press V.SEL/DISP.OFF.
Each press of the button will cycle through the
modes as follows:
AUX-1, 2, 3 is only displayed when AUX IN 1, 2, 3 SIG. is
ON. For details, refer to Setting the AUX Mode, page 44.
DVD displays when S-IN SIG. is set to ON.
For details, see Setting the S-IN Mode, page 45.
When connected with an IONBUS compatible head unit:
The picture source can be switched from the head unit. For
details, see Operating from the Head Unit Switching the
Source, page 47.
AUX-1
NAVI.
AUX-2 AUX-3 DVD
WIDE/
R.SEL
V.SEL/
V.MUTE
R.SEL/WIDE
V.SEL/DISP.OFF
Supplement
See page 19 for supplementary information.
Continued
Supplement
Continued (Next page)
Indicates that the
description of the
operation continues
on the next page.
Remote control icon
Indicates operations
performed with the
remote control unit.
Main unit icon
Indicates operations
performed on the
main unit.
Supplement icon
Indicates that there is
supplementary information
on another page.
Button name
Buttons to be
operated are
indicated in bold.
1Sec/2Sec icon
Indicates that the
specified remote
control button
should be pressed
and held for over
1 or 2 seconds.