Filter
Top Products
Other Useful Features
20-EN
About VISUAL EQ
TM
Use VISUAL EQ to create the best image by compensating for the ambient light conditions, then
store your settings on the TMI-M990.
1 Select VISUAL EQ ON mode by pressing VISUAL
EQ.
VISUAL EQ ON OFF
VISUAL EQ
OPEN/CLOSE /
SETUP
/TILT
/TILT
V.EQ
/O/C
/FLAT
To display the Setup screen:
To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON
position. To do this, follow the procedure below.
1. Bring your vehicle to a complete stop at a safe location. Engage the parking brake.
2. Keep pushing the foot brake and release the parking brake once then engage it again.
3. When the parking brake is engaged for the second time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever in the Park position.
Now, the locking system for the Setup operation has been released. Engaging the parking brake
can reactivate the Setup, as long as the car's ignition has not been turned off. It is not necessary
to repeat the above procedure (1 through 3), of “To display the Setup screen.”
Each time the ignition is turned OFF, perform the procedure of “To display the Setup screen.”