Filter
Top Products
Other Useful Features
32-EN
TITLE
Adjusting and Storing
VISUAL EQ
TM
About REAR
SELECTOR
Blackout Mode On
and Off
Description
Adjusting and storing of VISUAL EQ can also be made
from the setup. The procedure is below. For more details,
see the General Setup Operation.
Operation from the main unit
1 Press and hold OPEN/CLOSE / SETUP for at least 2
seconds.
2 Press VISUAL EQ or OPEN/CLOSE / SETUP, and
select an item to adjust from BRIGHT, COLOR, TINT,
CONTRAST, SHARPNESS.
3 Adjust the image by pressing
/ TILT or / TILT.
4 When adjusting another item, repeat steps 2 and 3.
5 When the picture settings are complete, press VISUAL
EQ or OPEN/CLOSE / SETUP and select V.EQ
MEMORY.
6 Press / TILT or / TILT to select USER1 or USER2
mode.
7 Press V.SEL/DISP.OFF.
The image adjustments are stored in the selected mode.
8 After setting, press and hold OPEN/CLOSE / SETUP for
at least 2 seconds. The screen returns to the previous
one.
Operation from the remote control
1 Press and hold BAND/SETUP for at least 2 seconds.
2 Press
or , and select an item to adjust from
BRIGHT, COLOR, TINT, CONTRAST, SHARPNESS.
3 Adjust the image by pressing
or .
4 When adjusting another item, repeat steps 2 and 3.
5 When the picture settings are complete, press
or
and select V.EQ MEMORY.
6 Press
or to select USER1 or USER2 mode.
7 Press V.SEL/V.MUTE.
The image adjustments are stored in the selected mode.
8 After setting, press and hold BAND/SETUP for at least 2
seconds. The screen returns to the previous one.
The REAR SELECTOR function which switches the source
of the rear monitor is allowed to set while driving.
When using the head unit Blackout function, the main unit
switches and input indicators illumination will be turned OFF.
Related page
Supplementary
information
This page includes supplementary information for pages 20 to 31.
Please refer to these pages.
Page 23
Page 31
Page 26