Filter
Top Products
17-EN
Switching Display Modes
1 Press and hold R.SEL/WIDE for at least 2 seconds in
the visual source.
Each press changes the display modes as follows:
In Normal mode, the monitor displays a normal
picture at the center of the screen with a vertical
black band at each side.
In Wide mode, the monitor displays a normal picture
wider to fit in a wide-screen monitor by evenly
stretching out the picture horizontally.
In Cinema mode, the monitor displays a normal
picture by stretching out the picture horizontally and
vertically. This mode is good for displaying a cinema
type picture at the 16 : 9 ratio.