Alpine TMI-M990 Universal Remote User Manual


 
45-EN
Setting the S-IN Mode
Setting item: S-IN SIG.
Setting content:
ON/OFF
ON:
Display S video output compatible ALPINE head unit source.
OFF:
Do not display S video output compatible ALPINE head unit.
Set when connecting to a S video output compatible head unit.
You cannot set to OFF when connected to an IONBUS compatible head unit.
If connected with a DVI-9990, set Changing Video Output on the S-VIDEO of DVI-9990.
For details, refer to the DVI-9990 instructions manual.
Name External Equipment to Be Displayed (AUX)
When at least one external device is connected, you can name each as you like.
Setting item: NAME
Setting content:
AUX-1, (2, 3)/DVD/VCR/GAME/TV
*
1
/CAMERA
*
2
*
1
To connect with a TV unit, refer to TV Operation page 46.
*
2
CAMERA is only displayed in AUX-3 mode. Set to camera
when the back camera is connected.
Can be only when AUX IN 1, 2, 3 SIG. is ON.
Name the S Video Input to Be Displayed (S-IN)
If a S video output compatible ALPINE head unit is connected, you can attach a display name you like.
Setting item: NAME
Setting content:
AUX/DVD/VCR/GAME/TV
Only valid when S-IN SIG. is ON.
Not displayed when changing the source.
You can check the display by pressing DISP./A.MEMO on the remote control.
External Input Audio Level Adjustment
Setting item: INPUT GAIN
Setting content:
HIGH/LOW
HIGH: Set external input audio level to high.
LOW: Set external input audio level to low.
Can be set when AUX IN 1,2,3 SIG. ON.
Cannot be set to LOW, when the system switch is set to STANDALONE. (Refer to About
the system switch (page 54).)