Filter
Top Products
Fitting the batteries
Before using the remote control you need to insert
the two AAA batteries supplied with the C23.
• Gently slide open the cover on the back of the
remote control:
• Insert the two batteries, observing the polarity
printed on the bottom of battery compartment:
• Slide back the cover until it clips into place:
Note: Replace only with alkaline
batteries type AAA, LR03, or
equivalent.
When disposing of old batteries please be
considerate to the environment.
Switch on/off
Play or pause the disc
Press and hold for 6 seconds with the
tray open to reset the remote code
Increase volume of amplifier
Select Blu-ray mode
Press and hold for 1.5 seconds
to select a source
Restart the current track,
or skip to the previous track
Repeat the track or disc
Show/hide on-screen display
Skip to the next track
Display Pop-up Menu/DVD Menu
Change the display brightness
Choose audio language/track
Reverse scan
Forward scan
Display Top Menu/Title Menu
Choose camera angle
Choose media source
Choose output resolution
Choose subtitles
Zoom in/out and
adjust aspect ratio
Play from specified location
Select SHUFFLE or RANDOM
Open or close the tray,
or stop the disc
Decrease volume of amplifier
Clear numeric input
Display the Setup Menu
Move right on menu
Move up on menu
Move down on menu
Select item on menu
Move left on menu
Hold down to RETURN from menu
Enter track number
This page explains how to use the C23 remote
control to operate the BD32, and how to fit the
batteries into the remote control.
When using the remote control, the front window of
the remote control should be pointed to the infrared
sensor on the front panel within an angle of ±30°
and a range of about 26 ft.
NOTE: When a button is pressed but its function is
invalid or unavailable at the moment, the TV screen
displays a circle with a diagonal line.