Filter
Top Products
S E T U P M E N U O P T I O N S
49
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
SACD Priority
DVD-Audio Mode
Auto Play Mode
PBC
Language
On
Off
Setup Menu
Exit
Playback starts when the PLAY button is pressed
4. To select a value from the list of available
settings, press the UP/DOWN ARROW
buttons and then press the ENTER button
to confirm.
For example, to select “Off” for “Auto Play
Mode”, use the UP/DOWN ARROW
buttons to highlight the “Off” selection and
press the ENTER button.
5. To exit the SETUP menu at any time,
press the SETUP button on the remote
control or select Exit from the Setup Menu
sections.
The settings are permanently saved when the player is turned off using either the front panel power
button or the remote control. If the AC power is interrupted before the player enters standby status, the
settings will not be saved. To ensure proper saving of the SETUP menu settings, please turn off the
player and turn it back on after you make major changes to the SETUP menu options.
S E T U P M E N U O P T I O N S
50
Playback Setup
The “Playback Setup” section is designed to configure playback preferences for various contents. The setup
items in this section are:
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
SACD Priority
DVD-Audio Mode
Auto Play Mode
Auto Resume
PBC
Parental Control
Language
Multi-Channel
DVD-Audio
On
On
On
Setup Menu
Exit
Choose which SACD layer to play
1. SACD Priority: To select which audio layer to play for SACD (Super Audio CD). The options
are:
x Multi-Channel – Play the multi-channel surround audio layer
x Stereo – Play the 2-channel stereo audio layer
x CD Mode – Play the CD layer of a hybrid SACD disc
2. DVD-Audio Mode: To select which portion of a DVD-Audio disc to play. The options are:
x DVD-Audio – Play the DVD-Audio portion of the disc with high-resolution audio
x DVD-Video – Play the DVD-Video portion of the disc with Dolby Digital or DTS audio
3. Auto Play Mode (On / Off): To select whether the player shall start playing an audio CD or
SACD automatically. When auto play mode is turned on, these discs will start playing upon
insertion into the player. When auto play mode is turned off, the player will wait for the user to
start playback by pressing the PLAY button.
4. Auto Resume (On / Off): To select whether the disc playback shall start from the previously
saved point or not. This setting applies to CD, SACD, DVD and certain Blu-ray disc. When
auto resume is turned on, the playback automatically starts from the previously saved point.
When auto resume is turned off, the playback starts from the beginning.
5. PBC – Play Back Control: To enable/disable Play Back Control. Play Back Control is a
primitive form of disc menu. The options are:
x On – If the disc contains Play Back Control, show the menu.
x Off – Play back the contents by sequence.
6. Parental Control: To set parental control ratings in order to prevent minors from watching
inappropriate content. This function depends on the disc being properly rated and encoded.
x Press the ENTER button to bring up the rating selection menu.
x To adjust the parental control settings, you must enter the current parental control password.
If you have not set a parental control password yet, the default password is “0000”.
x The parental control menu contains the following sub-items: