Filter
Top Products
47
SETUP MENU OPTIONS
The Setup Menu of the Primare BD32 presents many setup and configuration options. For
most users, the default configuration will be sufficient and will not require any changes to the settings.
However if you need to configure the player to perfectly match your home theater setup and viewing
preferences, please refer to the following sections for details about each configuration option.
Using the Setup Menu System
In many places of this guide, the player’s Setup Menu needs to be adjusted to match your specific audio/video
configuration. When performing menu adjustments, we will use the following terminology to indicate the
location of the desired function:
Setup Menu Section > Menu Item > Selection
Setup Menu Section is the uppermost Setup Menu level. With the Primare BD32 there are six (6) Setup
Menu sections listed in the left column of the Setup Menu screen. They are: Playback Setup, Video Setup,
Audio Format Setup, Audio Processing, Device Setup, and Network Setup.
Menu Item is the parameter to be adjusted which appears in the center column of the Setup Menu. Once you
enter a Setup Menu Section, the list of Menu Items and their current value are displayed in a box.
Selection is the actual numeric or descriptive element that represents the change being made to the selected
parameter. It is the item located to the right of its corresponding Menu Item.
A Scroll Mark appears at the top or bottom of the menu when there are more Menu Items or Selections
than what can fit in a screen. You may use the UP and DOWN ARROW buttons to scroll the display in order
to access additional items.
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
SACD Priority
DVD-Audio Mode
Auto Play Mode
PBC
Parental Control
Language
On
Off
Setup Menu
Exit
Playback starts when the PLAY button is pressed
Setup Menu Section
Navigation Cue Help Hint Scroll Mark
SelectionCurrent ValueMenu Item
S E T U P M E N U O P T I O N S
48
The preceding diagram should give a good description of the various elements and their context. In this
screen we could, for example, instruct you to set the Auto Play Mode parameter to Off in the Playback
Setup section. To indicate where we were, you would see the following: Playback Setup > Auto Play Mode
> Off.
NOTE
It is possible that some setup items are grayed-out and inaccessible. This can be caused by
the disc still being played back or interlocking with mutually exclusive setup items. Please
stop playback or eject the disc before trying to change these setup items. If you still cannot
access the setup item, please check for configuration conflicts and consistency. For
example, if “Video Setup > Primary Output” is set to “Analog”, the “Output Resolution >
Auto (or Source Direct)” menu item will be grayed-out. Setting “Primary Output” to “HDMI
1 (or HDMI 2)” will enable the “Auto (or Source Direct)” resolution.
To access the player’s Setup Menu simply press the SETUP button on the remote control. Since some Setup
Menu options can become inaccessible when the player is playing a disc, it is recommended that you operate
the Setup Menu when playback is fully stopped or when there is no disc in the player.
1. Press the SETUP button on the remote control, and the TV screen displays the following:
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
SACD Priority
DVD-Audio Mode
Auto Play Mode
PBC
Parental Control
Language
Multi-Channel
DVD-Audio
On
On
Setup Menu
Exit
Configure playback preferences
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
SACD Priority
DVD-Audio Mode
Auto Play Mode
PBC
Parental Control
Language
Multi-Channel
DVD-Audio
On
On
Setup Menu
Exit
Set the auto play mode for CD and SACD
2. Press the UP/DOWN ARROW buttons to
select the section. There are 6 sections:
Playback Setup, Video Setup, Audio
Format Setup, Audio Processing,
Device Setup, and Network Setup.
Press the ENTER button or the RIGHT
ARROW button to enter the selected
section.
3. Press the UP/DOWN ARROW buttons to
select the setup item to be changed, and
press the ENTER or RIGHT ARROW
button to change the setting. When the
scroll icon is shown at the top or bottom of
the Setup Menu, it indicates that there are
more menu items that can be accessed by
scrolling with the UP/DOWN ARROW
buttons.
For example, in the Playback Setup
section, you may use the UP/DOWN
ARROW buttons to select the “Auto Play
Mode” setup item, and press the ENTER
button to change the “Auto Play Mode”
setting.