Filter
Top Products
4
Name Function
(12) Number button
~
-
As a number key for entering password in
playback and preview mode
-
Channel camera selection number in playback
and preview mode
-
As a preset position with in PTZ control
mode
-
With button can switch to different
screen display modes
(13) LCD Display
Display DVR system status such as temperature and operate status
(14)
A functional key for multiple system control
-
Press to enable multiple function modes and the
button will
light up blue.
-
To exit multiple function modes, press again.
+ : Switch to single screen display mode
+ : Switch to QUAD display mode
+ : Switch to 9 spilt screen display mode
+ : Switch to 16 spilt screen display mode
+ ~ : User defined display mode(see also
MULTI-QUAD:LIVE
and
MULTI-QUAD:Play
in Chapter 3)
system status indicators:
: System power indicator. Indicate running state of system. Lights when the
system is running.
: Removable hard disk indicator. Indicate running state of the hard disk.
Lights when the HDD is running
: Recording status indicator. Lights when the system is recording.
(15) Status LEDs
: Network status indicator. Lights when the system network connection is
enabled.
-
In OSD mode:
Move selection to left, right, up, and down
-
In PTZ mode:
To move PTZ camera lens to left, right, up and down
(16)
Confirm or make a selection
(17)
To call out OSD menu
(18)
To start auto scan
(19)
To start USB backup
(20)
AB Repeat function allow user to set a video segment from A to B point and play
on the surveillance screen until user stop. User also can backup AB Repeat file
to pen drive or external hard disk (see also
2.1.1).
(21) DVR-ROM
To backup the recorded file to DVD+RW disk