Filter
Top Products
27
OSD MENU Description
1
PELCO-D
2400
PTZ SETUP
CAMERA
PTZ CONTROL
ID
PROTOCOL
BAUD RATE
AUTO PAN GROUP
05 SEC
DWELL TIME
1
OFF
1 - 4 5 - 8 9 - 12 13 - 16
BAUD RATE:
To setup the baud rate of PTZ camera. For more detail, please
refer to your PTZ camera’s user manual.
AUTO PAN GROUP:
Select the preset number to assign an auto move direction for
the PTZ camera. For example: 1-4 means the PTZ camera will
auto move from preset position 1, 2, 3 to 4.
DWELL TIME:
Set a time that how long the PTZ camera stays in that position
before it moves to the next one.
CAMERA SETUP
CAMERA SELECT
RECORD SELECT
AUDIO RECORD
CAMERA TITLE
VIDEO SHIELD
VIDEO ADJUSTMENT
PTZ CONTROL
AUTO SCAN
AUDIO OUT
1 2 3 4
9 10 11 12
5
13
6
14
7
15
8
16
1 2 3 4
9 10 11 12
5
13
6
14
7
15
8
16
1 2 3 4
9 10 11 12
5
13
6
14
7
15
8
16
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
AUTO SCAN
Enable/disable auto cycle switch to display the next channel
when in full screen preview. User can set different switch time for
each channel. The time range is from 1 ~30 seconds.
OFF
10 SEC
10 SEC
10 SEC
10 SEC
AUTO SCAN
AUTO SCAN
CHANNEL - 1
CHANNEL - 2
CHANNEL - 3
CHANNEL - 4
10 SEC
10 SEC
10 SEC
10 SEC
CHANNEL - 5
CHANNEL - 6
CHANNEL - 7
CHANNEL - 8
10 SEC
10 SEC
10 SEC
10 SEC
CHANNEL - 9
CHANNEL - 10
CHANNEL - 11
CHANNEL - 12
10 SEC
10 SEC
10 SEC
10 SEC
CHANNEL - 13
CHANNEL - 14
CHANNEL - 15
CHANNEL - 16
AUDIO OUT
Select the channel to output the audio signal. Please make sure
the audio output device (such as a speaker) is connected to DVR
unit. Use
, , buttons to move to the selection. Use
and buttons to select the channel.