Filter
Top Products
60
8.1.1.3 Record Setup
(1)
(2)
(3)
(4)
(5)
(1) Camera icon
Select the camera that user wants to set up.
(2) Record Select
Enable/disable the channel number to record video
i
The channels which could be recorded should be enabled in the CAMERA SELECT first.
(3) Audio Record
Enable/disable channel number audio recording. To record sound, make sure the microphone is
connected to the unit
(4) Record Schedule
By default, in 24 hours, the recording schedule is set to always record every hour. Refer to the
table below to customize the recoding condition
Condition Description
NO REC Disable video recording
ALWAYS REC Record non-stop
MOTION REC Start recording when any movement is detected
SENSOR REC Start recording when the sensor has triggered
(5) Motion Detection
-
Motion Camera Enable
Enable/disable the channel number to detect motion.
-
Motion Record Time
Set the amount of time (in second) to record when a motion has detected.
-
Sensitivity
Set the sensitivity level. The sensitivity is from high, 9~ 2 and low.