17
2.1.3 Controlling PTZ Camera
Using remote control, user can easily control PTZ camera at local site. Before starting, please go to
OSD menu to enable PTZ control (see
3.1 Menu Function: PTZ Setup).
2.1.3.1 To Enter the PTZ Mode
To control PTZ camera, user need to enter the PTZ mode first. Press button, and camera
channel number button (
1
~ ) that the selected channel will switch to PTZ mode in a full
screen display.
To exit PTZ mode, press . Also, the system will automatically exit PTZ mode when the idle
time is over 1 minute.
2.1.3.2 To Set Preset Position
User can set 16 preset positions for PTZ camera. Using +
1
to button to set the
preset position.
1. Press
and camera channel number button (
1
~ ) to enter PTZ mode.
2. Using
, , and to adjust the PTZ camera to the position that user
wants.
3. Press
to save
4. To move the PTZ camera to preset position, just press the number button.
