Filter
Top Products
58
Video Standard
Record Mode
NTSC PAL
D1 16, 80, 240 16, 80, 200
CIF 16, 80, 160, 240, 480
16, 80, 200, 400
- VIDEO QUALITY
Select the video quality setting from BEST, HIGH, MEDIUM, GOOD, NORMAL or LOW.
BEST – best record quality but less record hours
LOW – longest record hour but quality is ordinary
NORMAL – allows you to record more hours but the quality of the recorded video is
moderate.
(2) NTP Setting
Setup the time auto synchronization.
- Enable NTP
Enable/disable time synchronization automatically through network. The DVR system will
auto synchronize time from NTP servers which user has entered in following server 1 and
server 2 column.
i
When the daylight saving is enabling, the auto time synchronization will be stopped.
- TIME ZONE:
Select the time synchronization time zone. The time zone will base on GMT (Greenwich
Mean Time) time zone.
- Server 1/Server 2
Fill in the network time server URL or IP address (clock.stdtime.gov.tw or
time.stdtime.gov.tw)
(3) MISC
- Auto Scan
Enable/disable auto cycle switch to display the next channel when in full screen preview.
User can set different switch time for each channel. The time range is from 5 ~30 seconds.
Click Auto Scan Time to set the auto scan time period.
- Audio Out Select
Select the channel to output the audio signal. Please make sure the audio output device
(such as a speaker) is connected to DVR unit.
- Audio Mute
Enable/disable to hear audio sound of local DVR. To hear sound, make sure the unit is
connected to an audio output device (ex: speaker). If user recorded video in audio mute
status, there is no sound when playback
- Time Format
Select the display format of the date
- VGA Resolution
Select the display resolution
(4) DLS
Setup daylight saving settings.
- Enable DLS
To enable/disable daylight saving function.