Filter
Top Products
6
1.5 Setting Up the DVR Unit
1.5.1 Installing the Removable Hard Disk
The DVR unit allows user to install one hard disk. Before installing the hard disk, make sure to set
the hard disk master jumper setting. Adjust the jumper setting according to the instructions on the
hard disk label.
i
For hard disk spec, please referring to http://www.avermedia.com/nvd/hardware-recom_eb.asp
The “compatible hard disks” indicated in the above recommendation list only means that these
commercially available hard disks were tested with AVerMedia
®
products and functioned well
under normal operation conditions. AVerMedia
®
does not guarantee or provide warranties,
explicitly, implied or statutory with respect to the reliability of the hard disk function or its
compatibility. In no event AVerMedia
®
shall be liable for damages, with respect to any business
interruption of clients, lost profits, loss of programs or other data on your information handling
system or otherwise. This includes direct, indirect, incidental, special, or consequential
damages, resulting from the incompatibility caused by the usage of these hard disks, even if
AVerMedia
®
has expressly advised about the risk of such damages. The entire risk arising out of
the use of any information attached here with is borne by the recipient.
Follow the illustrated instructions below to install the hard disk:
1. Unlock the removable hard disk drawer
2. Open the removable hard disk drawer
3. And then, pull out the removable hard disk
drawer
4. Remove the removable hard disk drawer cover