Filter
Top Products
AVerMedia LX5000 User’s Manual
31
Key in”123456” (default root password) the on password field for the
initial login from root. Click OK to bring the next dialog as follows to
change password:
In the Change password field of the root’s configuring area, type the
new password and retype it to confirm the password. Follow the same
steps to change administrator’s and operator’s passwords. After initial
configurations you can enable administrator and operator authorization
levels by clicking the enable administrator and enable operator
buttons. Click OK to save the setup or Cancel to back to the menu of
System setup without saving.
If you do not set the passwords and enable the administrator
and operator, there is no password security and users will have
unrestricted access to system configurations. However, it is
recommended to do it only after the initial configurations. This is done
to avoid having to always enter passwords when entering and exiting
configuration screens.
Higher-level users can set/change passwords for lower level
users. For example, the root can set/change the passwords for
the administrator and operator, and the administrator can set/change
the password for the operator. The authorization order is root >
administrator > operator.
AVerMedia LX5000 User’s Manual
32
See tables below for more clarification about the authorization.
1. When both the enable administrator and the enable operator
buttons are activated, access to the following configurations are
restricted as follows.
Functional Item Root Administrator Operator
Start/stop record
Setup
√ √ √
System setup
Password Setup
Camera Setup
Recording Setup
Setup E-Map
Network Setup
Alarm Setup
Schedule Setup
Printer Setup
√ √ √
Playback
√ √ √
Event search
√ √ √