Filter
Top Products
AVerMedia LX5000 User’s Manual
45
Please follow the following steps to set the electronics map:
1. Input the background map: Press “Edit" button and get into BMP,
JPEG edit program to modify and edit the background map. Or press
the “input" button to input the existing map directly.
2. Camera, sensor, transformer: Depends on the install condition to
click and pull out the camera, input sensor and output transformer
from each column to the background map. If you want to delete them,
you can just simply pull them back to the original columns directly.
AVerMedia LX5000 User’s Manual
46
3. Instruction: You can input the related exploitation and information
of electronics map from the instruction column. The map name and
instruction the status rows of electronics map
Default Value: Set the camera at the default value.
Refresh: Set all the values back to the previous values.
Save: Save the modified values and parameters.
Quit: Quit the recording setting screen.
Network Setup
Network Service
You can start the Remote Management and Web Cam, then set the
TCP/IP server port (Default value is 9090), and HTTP server port
(default value is80) information. Please select the camera that you want
to open the connection.
IP Configuration:
Enable DHCP
Please select this column, then you can get the dynamic IP address.
If your LSS digital monitor system is at the dynamic IP condition,
you can log on ddns.avers.com.tw to use the DDNS registration web
page to register your domain name and password. Then, you can
input your domain name and password from this column.
Regarding the registration of DDNS domain registration, please refer
to the attached file 1.
Input the IP address, net mask, gateway, and hostname.
Dynamic DNS
In case a dynamic server is severed, please register a domain name
with the IP address: ddn.avers.com.tw
on line. Refer to Appendix B for