Filter
Top Products
AVerMedia LX5000 User’s Manual
15
CONTACT RATINGS
Contact Arrangement 1 Form C (SPDT)
max. Switch Power
max. Switch voltage
max. Switch current
125VA 60W
125VAC 30VDC
2A
Contact Resistance 100m
Resistive Load
1A/125VAC
2A/30VDC
Contact Material AgNi10
External I/O Box pin signals
Pin # Definition
1 INPUT SIGNAL 1+
2 INPUT SIGNAL 2+
3 INPUT SIGNAL 3+
4 INPUT SIGNAL 4+
5 OUTPUT 3 – Normally Closed
6 INPUT SIGNAL 1-(GND)
7 INPUT SIGNAL 2-(GND)
8 INPUT SIGNAL 3-(GND)
9 INPUT SIGNAL 4-(GND)
10 OUTPUT 3 – Common
11 OUTPUT 1 – Normally Open
AVerMedia LX5000 User’s Manual
16
12 OUTPUT 1 – Common
13 OUTPUT 2 – Normally Open
14 OUTPUT 2 – Common
15 OUTPUT 3 – Normally Open
Sensor Inputs
External sensors such as infrared sensors, smoke detectors, proximity
sensors, door sensors, etc., can be attached to the AVerMedia LX5000’s
input-signal connectors on the External I/O Box. These devices trigger
the system to respond with a predefined action (e.g. record video)
Relay Outputs
The AVerMedia LX5000’s output connectors (relay output) can be
attached to external output control devices such as alarms. The system
can be configured to activate or deactivate these devices. Each
AVerMedia video card supports three relay outputs. Two of them are
normally open relays with one being a toggle switch.