Filter
Top Products
10 ______________________________________________ Barco - RHDM-1701 - Maintenance Manual
Important notices, product safety precautions and package & storage
After completion of all required steps, the claim should normally be finalized
within one month. For more information about the claims handling procedure,
contact Barco n.v.
2.4.3 Storage
It is best to store the display unit in its original packaging in a room that does
not exceed the storage conditions mentioned in the technical specification.
2.4.4 Electrolytic capacitors
The display unit needs to be powered on for a period of 24 hours at least once
every 2 years to allow internal electrolytic capacitors to be reformed. Failure to
do so may lead to compromised reliability.
2.4.5 Packaging
• Packaging corresponds to standards for international transport by air / sea /
ground.
• Dimensions:
3 Height: 550 mm
3 Width: 675 mm
3 Depth: 400 mm
• An optional flight case is available for flexible demo purposes: contact Barco
for more details.
2.4.6 Repack instructions
CAUTION
:
To repack the display unit, please use the original packaging material.
• Place the box with the backside on a stable and flat surface.
• Make sure the rack brackets are mounted to the display unit and the stand,
if there was one used, is removed.
• Place the display unit in the plastic bag and seal the plastic bag.
• Place the 2 protective covers one on the left side of the display and one on
the right side of the display. Note that the left and right side are slightly dif-