Filter
Top Products
38 ______________________________________________ Barco - RHDM-1701 - Maintenance Manual
Removal and reinstallation of electronic boards
Reinstallation of the communication board
Execute all actions described above in reverse order.
Take the following points into account:
• When placing the communication board in the back cover, verify that the
metal housing of the USB ports is nicely fitting in the holes (n°3 in the figure
above).
7.13 Removal and reinstallation of the control box
Figure 20: Control box
Figure 21: Location of screws, cables to remove or install the control box
1
2
3
Torx (4x T10) that fix the control box to the front cover
Control panel removed from the front cover
Cable gap in front cover for control panel cables
11
1
1
1
3
2