Barco - RHDM-1701 - Maintenance Manual ______________________________________________ 27
Removal and reinstallation of electronic boards
7 Removal and reinstallation of electronic
boards
7.1 Service levels
Maintenance levels:
Table 1: Maintenance levels
The Maintenance manual may only be used by personnel with a level of 2 or
higher.
7.2 Module replacements (level 2 and level 3)
The following boards can be replaced at an authorized service center:
• Power supply (B563073)
• Power Interface Board (K5831235)
• HDSDI Input Board (K5831223)
• DVI Input Board (K5831220)
• Communication Board (K5831234)
• Control Box (K5031237)
Level Swap
level
Description Required level and/
or training
1 NONE • User level – adjustments
• User software uploads
User
Product training
2 LRU Technical Services:
• Swap of electronic boards described in
maintenance manual
• Calibration of display unit
Product training
Certified “customer
personnel” or “partner”
3 LRU Qualified regional service center:
• Swap of electronic boards described in
maintenance manual
• Repair of electronics
• Calibration of display unit
Repair training
4LRU
+
SRU
Product base:
• Swap of electronic boards described in
maintenance manual
• Repair of electronics
• Calibration of display unit
• Panel swap, optics and backlights
repair
• Iris board swap
• Firmware uploads
Repair training