Filter
Top Products
Barco - RHDM-1701 - Maintenance Manual ______________________________________________ 39
Removal and reinstallation of electronic boards
Removal of the control box:
• Follow the removal instructions of the back cover to remove the back cover.
• Place the front cover on the table with the inside facing upwards.
• Remove the control box by unscrewing 4 screws that fix the control panel to
the bottom of the display unit (n°1 in the figure above).
• Slide the cables through the cable gap (n°3 on the figure above), so that the
control box can be completely removed.
Reinstallation of the control box:
Execute all actions described above in reverse order.
Take the following points into account:
• To fasten the control box to the cover. First place the 4 fixation screws in the
front cover and then locate the box on the front so that the screws fit in the
foreseen holes in the control box. Fasten the screws one by one.