Ciprico 4400 Universal Remote User Manual


 
Introduction MediaVault 4440 User Manual
2-2
MV 4440_Ciprico Inc.
About Your MV 4440
Congratulations on purchasing the MV 4440 from Ciprico Inc., a leader in
performance, quality, and storage for video editing and storage.
The MV 4440 contains 4 modules, called "vPODs". Each vPOD is a
10-drive array. The MV 4440 storage system utilizes the latest RAID 6
drive protection and 4Gb Fibre Channel interface technology. RAID 6
provides for two-drive-down redundancy. In an unlikely event that two
drives are down in a vPOD the data is still protected and available.
TABLE 2-1. Features of the MV 4440.
Feature Number or Value
Fibre Channels Two 4Gb Fibre Channels, with two ports per channel
Fibre Channel interface Compatible with earlier generation optical Fibre Channel
RAID Controller One per vPOD
RAID levels RAID 0 or RAID 6 modes
vPOD The MV 4440 consists of four vPODs. Each vPOD has ten 2.5-
inch disk drives and a RAID controller. The system therefore can
contain up to 4 vPODs (40 disk drives and four RAID controllers)
Disk drive modules 40 2.5-inch disk drive modules
Real Time RAID (RTR) capability RTR reconstructs data "on the fly" should a drive "glitch"
Data rate (internal) 500 MBytes/sec per RAID controller
Date rate for four striped vPODs 1000-1200 MBytes/sec
Burst rate (maximum) per channel 380 MBytes/sec per RAID controller
Sustained data rate per channel 300 MBtyes/sec per RAID controller
Mode Selection Easy user selection of functionality via Mode Selection and
Mode Set switches. No complicated software setup or
maintenance
Fans Multiple cooling fans
Serial port One serial port on each vPOD for maintenance and support
Alarm Audible alarm and LED indicators
Power Supply One removable power supply module (containing two power
supplies)