Filter
Top Products
MV 4440_Ciprico Inc. 5-7
MediaVault 4440 User Manual Operations
Power Module
The power module contains two power supplies. If one power supply malfunctions,
the two vPODs it powers will not power-up. (The power load for the upper two vPODs
is distributed across the upper power supply, and the power load for the lower two
vPODs is distributed across the lower power supply).
The power modules must be serviced by trained personnel only. Call Ciprico Inc.
technical support department for additional instructions.
Diagnostic Port
The diagnostic port enables firmware downloads or perform special diagnostics to
each vPOD. See “DIAG - Diagnostic Port” in Chapter 4, Installation.
Mode Select
Used to change the mode (RAID type) number. See the “Mode Change Procedure”
on page 5-12.
Mode Set
Multi-function button. See the description in the “Mode Set Button”
section on
page 5-14.
TABLE 5-3. Rear Components of the MV 4440.
Component Description