DirecTV D10 CRT Television User Manual


 
32 Chapter 4
Using On-Screen Menus
Chapter 4 33
Using On-Screen Menus
Tip: Don’t Forget About the EXIT
Button
Press the EXIT button on the remote control
to remove the on-screen menus and return to
normal viewing.
Turning Notication On or Off
There are three ways you can turn Caller ID notication on or off:
• Select Turn Off Notices (or Turn On Notices if Notices have been turned off)
from the Caller ID Quick Menu
• Select Off from the choice list for Notices in the Caller ID menu under the
Service tab
• Select Disable Notication when a Caller ID alert appears
The Call Log
The DIRECTV
®
Receiver can store up to 10 call entries in the Call Log screen.
When the memory is full, a new call automatically replaces the oldest call in
memory.
To access the call log:
1. Press MENU on your remote control.
2. Use the up and down arrows to highlight Caller ID & Msgs. Press SELECT to
select it.
3. Press SELECT with Caller ID highlighted to go to the Caller ID Quick Menu.
If you have calls in the Call Log, these will be listed in the Caller ID Quick
Menu. To get more information on the calls listed, proceed to the next steps.
4. Use the up and down arrows to highlight Edit Settings. Press SELECT to select
it.
5. Press the red button on your remote to move to the Call Log tab in the Caller
ID screen.
Deleting Calls
From the Caller ID Log screen, you can delete entries:
1. Highlight the call you wish to delete and press SELECT.
2. Press SELECT with Delete highlighted. The next screen asks you to conrm
that you want to delete the call. Press SELECT to delete the record from the
Caller ID Log.