Filter
Top Products
Page 43
Using the Menus
once and then all four device mode buttons to flash once.
3. If you see the
System Info screen, press the SELECT button to close the
screen. You have recovered the video image from your satellite receiver.
4. If you do not see the
System Info screen, repeat steps 2 and 3 until you
have recovered the video image from your satellite receiver.
Note: Press any remote control button other than the RECOVER button to
end this procedure.
Note: If the RECOVER button is not programmed to a specific channel,
the RECOVER button will first try to tune your TV to channel 3, then
channel 4, and then other video inputs with each press of the RECOVER
button. You may need to press the RECOVER button many times to
recover the video image from your satellite receiver. If the RECOVER
button is programmed to a specific channel (see page 26), the RECOVER
button will tune the TV to the specific channel.
DVR Buttons
Use these buttons to record or for play back of a DVR program or event. See
Using the DVR Features on page 64 for details.
PIP Button
Press the PIP button to open the PIP window. To make the PIP window larger,
press this button again. Press the button a third time to close the
PIP window.
Swap Button
Press the SWAP button to swap the video image in the main display with the
video image in the
PIP window.
Position Button
Press the POSITION button to move the PIP window to different positions on
the TV screen. Each press of this button move the
PIP window.
Using the Menus
The menus make using the receiver’s features and selecting programs to watch
quick and easy. Features accessed by using the menus include setting parental
controls and locks, choosing a program or event, and creating a Favorites list.