Filter
Top Products
Using TV Features 73
Using Channel Zapping
Channel zapping lets you get a quick look at programs broadcast on up to seven additional
channels while you’re watching a TV program on an eighth channel. If you see a different
channel that you want to watch, you can make it your main program.
To use channel zapping, you must be watching a cable or broadcast program received through
the ANT 1 port (as shown on page 17). The factory-installed jumper cable that connects the
ANT 2 and RF Output ports also has to be in place. Follow the steps below to turn off the
ANT 2 port; this frees the necessary tuner.
Turning Off the ANT 2 Port
1 Make sure the jumper cable connecting the ANT 2 and RF Output ports is still installed
on the back of your TV.
2 Press the Menu button on the TV panel or remote control. You see the Video menu.
3 Press Next > to highlight Channel, then press Enter.
4 Press Select d to highlight Use of Ant. 2, then press Next > to select OFF.
5 Press Menu to exit the menu system.
Note
You also need to turn off
the V-Chip feature to use
channel zapping. See
page 55 for instructions.