Filter
Top Products
a
name — The channel name can be modified by editing this field and clicking Update.
This name is visible during source selection on a decoder (display) as well as during file
selection on a recorder. The name should be comprised of letters, numbers and the
underscore character. Spaces can be used, but should be avoided if possible.
b
Playback Controls — See the Player Page section on page 35 for more information
on playback controls.
.
netSlave (not shown) — See the Player Page section on page 35 for more
information. This setting should not be modified on this page.
NOTE: The netSlave option is only available when video‑player0 is selected. For
all other selections, only slave to master is available.
c
slave to master — Checking this box causes the current player channel to synchronize
its playback control to its local master channel (Video channel‑0).
NOTES:
• This setting is enabled by default and should not be modified.
• The slave to master check box is available on all channels except
video-player0.
z When checked, all video channels are always synchronized to Video channel‑0. This
allows the playback controls to affect all of the playback channels simultaneously.
z When unchecked, individual playback channels can be controlled using the
playback controls.
NOTE: The audio, whiteboard, and data elements are always synchronized to
their associated video channel.
.
auto repeat (not shown) — See the Player Page section on page 35 for more
information.
NOTE: The auto repeat option is only available when video‑player0 is selected.
For all other selections, only slave to master is available.
d
Media panel — This panel contains the following parameters.
NOTE: The information contained in this panel is created from information supplied
by the Player page and should not be modified unless absolutely necessary.
z Playback Path — Type in the location of the file or directory or choose a file from
the Content Directory to automatically fill in this field.
NOTE: Typed in changes made to this field will only be implemented when
Update is clicked.
z Playback Date — This is automatically filled in when a file has been chosen from
the Content Directory or when a file location is manually entered into the Playback
Path
field.
z Playback Start — This is automatically filled in when a file has been chosen from
the Content Directory or when a file location is manually entered into the Playback
Path
field.
z Playback Finish — This is automatically filled in when a file has been chosen from
the Content Directory or when a file location is manually entered into the Playback
Path
field.
VNM Recorder • About the Web-based User Interface 39