Filter
Top Products
Alarms Page
This page is accessed by selecting the Alarms tab on the Device List page (see page 26).
Figure 28. Alarms Page
The Alarms page enables a user to define and monitor system alarms.
Filter Settings
Figure 29. Filter Settings Panel
The Filter Settings panel allows the default settings for each alarm type to be modified.
z Alarm Type — Select the particular alarm that is to have its default setting changed.
See the Alarm Type section on page 57 for more information.
z Alarm Source — Select the device where the alarm is to change. Alarm filters may be
set for either a single, specific unit or for all VN‑Matrix 200, 225, 300, or 325 devices in
the system.
z Alarm Severity — Set the alarm severity. Each alarm condition has a default severity
which may be overwritten using the filter controls. The default setting is shown in this
drop‑down menu. See the Alarm Severity section on page 57 for more information.
z Alarm Reporting — Set the alarm to be either "reporting" or "not reporting". Each
alarm condition has a default reporting setting. The default setting is shown in this
drop‑down menu.
VNM Recorder • About Alarms 56