Garmin Columbia 350/400 Universal Remote User Manual


 
Garmin G1000 Cockpit Reference Guide for the Columbia 350/400
1-5
SECTION 1
SYSTEM OVERVIEW
destination (the destination is either specified by the
identifier, chosen from the active route, or taken from
the map pointer position).
(3)
MENU Key
Displays a context-sensitive list of
options. This list allows the user to access additional
features or make setting changes that relate to particular
pages.
(4)
PROC Key
Gives access to IFR departure
procedures (DPs), arrival procedures (STARs) and
approach procedures (IAPs) for a flight plan. If a flight
plan is used, available procedures for the departure
and/or arrival airport are automatically suggested and
can be loaded into the active flight plan. If a flight plan
is not used, both the desired airport and the desired
procedure may be selected.
(5)
Joystick
Changes the map range
(distance top to
bottom of map display)
when rotated; activates the map
pointer when pressed.
(6)
Alphanumeric Keys
Allow data entry without
using the GDU FMS Knob to select individual
characters.
(7)
BKSP Key
Moves the cursor back one character
space.
(8)
SPC Key
Adds a space.
(9)
ENT Key
Validates or confirms a menu selection
or data entry.
(10)
CLR Key
– Erases information, cancels entries, or
removes page menus.
Press and hold to immediately
display the Navigation Map Page.
(11)
SEL Key
The center of this key activates the
selected softkey, while the right and left arrows move
the softkey selection box (light blue box around the
softkey label) to the right and left, respectively.
(12)
Decimal Key
Enters a decimal point.
(13)
Plus-Minus (±) Key
Switches entry between
the + and - characters.
(14)
NAV Key
Selects NAV Radio Control Mode.
The
FMS
Knob will now control the NAV radios.
(15)
COM Key
Selects COM Radio Control Mode.
The
FMS
Knob will now control the COM radios.
(16)
Frequency Transfer Key
Switches between
active and standby selected COM or NAV tuning
frequencies. Pressing and holding this key while in
COM radio control mode tunes the COM radio to
121.50 MHz, the emergency COM frequency.
(17)
PFD Key
Selects PFD Control Mode. The
FMS
Knob will now control PFD functions.
(18)
MFD Key
Selects MFD Control Mode. The
FMS
Knob will now control MFD functions.
(19)
Dual FMS–NAV/COM Knob (Multifunction
Control Knob)
With the MFD indicator illuminated,
the
FMS-NAV/COM
Knob performs the same functions
as a the
FMS
,
NAV
, and
COM
Knobs on the MFD.
With the PFD indicator illuminated, the
FMS-
NAV/COM
Knob performs the same functions as a
the
FMS
,
NAV
, and
COM
Knobs on the PFD.