Garmin Columbia 350/400 Universal Remote User Manual


  Open as PDF
of 132
 
Garmin G1000 Cockpit Reference Guide for the Columbia 350/400
1-7
SECTION 1
SYSTEM OVERVIEW
PFD – Select to display the additional softkeys for
additional configuration of the PFD.
METRIC
– Select to display the current and reference
altitudes in meters, in addition to feet. Selecting
the metric softkey also changes the barometric
setting to hectopascals.
DFLTS
– Select to reset default settings on the PFD.
BRG1 (bearing)
– Select to cycle through the
following information:
NAV1
– Displays NAV1 waypoint frequency or
identifier in the BRG1 Information Window.
GPS
– Displays GPS waypoint identifier and GPS
distance information in the BRG1 Information
Window.
OFF
– Removes the BRG1 Information
Window.
PFD
Press the STD BARO or BACK Softkeys
to return to the top level softkeys
.
Press the DFLTS Softkey to change the PFD
metric values to standard.
ARC HSI
360 HSI
STD BARO
BACK
ALERTS
BRG2
BRG1
METRIC
DFLTS
Figure 1-5 PFD Softkey Flow Chart – 2
360 HSI
– Select to display the 360° compass
rose.
ARC HSI
– Select to display the 140° viewable arc.
BRG2 (bearing)
– Select to cycle through the
following information:
NAV2
– Displays NAV2 waypoint frequency or
identifier in the BRG2 Information Window.
GPS
– Displays GPS waypoint identifier and GPS
distance information in the BRG2 Information
Window.
OFF
– Removes the BRG2 Information
Window.
STD BARO
– Select to set the barometric pressure to
29.92 inches of mercury (1013 hPa by selecting
the METRIC Softkey).
BACK
– Select to return to the previous level
softkeys.
ALERTS
– Select to display the Alerts Window.
 previous next