Filter
Top Products
Garmin G1000 Cockpit Reference Guide for the Columbia 350/400
10-1
SECTION 10 – HAZARD
AVOIDANCE
SECTION 10: HAZARD AVOIDANCE
10.1 CUSTOMIZING THE HAZARD DISPLAYS
ON THE NAVIGATION MAP
1) With the Navigation Map Page displayed, press
the
MENU
Key to display the Navigation Map
Page Menu. The cursor flashes on the ‘Map
Setup’ option.
2) Press the
ENT
Key. The Map Setup Menu is
displayed. Turn the small
FMS
Knob to select
the ‘Weather’ or ‘Traffic’ group to customize
the display of weather features. Select ‘Traffic’
to customize the display of traffic.
3) Press the small
FMS
Knob to return to the
Navigation Map Page.
Figure 10-1 Page Menu
Figure 10-2 Map Setup Menu
Figure 10-3 Map Setup Group List
10.2 STORMSCOPE
®
(OPTIONAL, 350 ONLY)
WARNING: The Stormscope system is not
intended to be used for hazardous thunderstorm
penetration. Weather information on the G1000
MFD is approved for weather avoidance only.
Refer to the WX-500 Pilot’s Guide for detailed
operation.
Displaying Stormscope Lightning Data on the
Navigation Map Page
1) Select the
MAP
Softkey.
2) Select the
STRMSCP
Softkey. Select the
STRMSCP
Softkey again to remove Stormscope Lightning
Data from the Navigation Map Page.
Figure 10-4 In-Flight Navigation Map Page Displaying
Stormscope Lightning Data