Filter
Top Products
3 - THE DUAL-DECK SYSTEM 13
1
2
3
4
5
6
7
89
0
•MUTE
•LCV
•VOL
•CH
100+
REPEAT
AUTO
SHUTTLE
TRK TRK
F.ADV/SKIP
POWER
•TV
VCR
C
O
P
Y
T
A
P
E
SLOW
TV/VCR
*Power — Turns the VCR on and off. Note:
Power will come on automatically when you
insert a videotape (Auto Power On).
Slow +/– — In Play mode, increases or decreases
the speed of slow motion playback.
*0-9 — Selects channels directly. In the Menu
system, selects menu items.
Trk , Auto — In Play mode, allows you to
manually adjust tracking. Press Auto to resume
Auto Tracking.
Shuttle — In Play mode, Shuttle gradually
increases the playback speed from double-
speed playback to picture search to jet search.
Shuttle gradually slows down the tape,
pauses, then goes into reverse picture search
and reverse jet search.
*100+ — Selects cable channels 100 and up.
*LCV (Last Channel Viewed) — Displays the
previously selected channel.
3 - The Dual-Deck System
Copy Tape — Copies the tape in Deck 1 to the
tape in Deck 2.
VCR — Sets the remote to operate your VCR.
TV — Sets the remote control to operate your
television. Note: When selected, the remote will
not operate the VCR. To program the remote,
see Appendix A.
TV/VCR — Switches between your TV’s tuner
and your VCR’s tuner; e.g., press when you are
taping a show with the VCR and you want to
watch another station on your television.
F.Adv/Skip — In Pause mode, advances the tape
one frame for every press. In Play mode, jumps
ahead one minute for every press (up to 5
minutes). In Copy mode, skip edits one minute
for every press (up to 5 minutes).
*Channel — Changes channels up and down.
*Volume +/– — Adjusts the sound level.
*Mute — Turns audio on and off.
Top Section
* Keys marked with an asterisk can be used to
operate your TV or VCR; see Appendix A to
program your remote control.
Remote Control Overview